Trustpilot

Installation

Watch our Exterior Stone Cladding, Interior Stone Cladding installation video. 

Wall Preparation for Stone Cladding 

Treat clean, dry and level surface with a primer. For Interior Stone Cladding, Stacked Stone and Brick Cladding, use a double coat of the primer. Check if you floor is leveled. If yes, you can start laying your tiles from the floor. If floor is not levelled properly you will need to fit starting,support for first line of your Stone Cladding panels. The  temperature during installation should be between 5 ° C and 25 ° C. Before bonding the stone, make sure that Stacked Stone tile has no visible defects, and then use a rice brush to clean the back surface of the Stone Cladding panels to which you will apply the adhesive. When laying stone for outdoor use, remember that the load on the panels is transferred to the substrate. The fences or walls where you place the stone should be isolated horizontally from the foundations.

Installation of Interior / Exterior Stone Cladding tiles 

For bonding Stone Cladding products, depending on the type of stone, use the correct - recommended gypsum or cement based  adhesive, applying it to the tile using a trowel. If necessary, sand the edge of the stone, removing irregularities. Concrete tiles can be easily cut with an angle grinder with a stone cutting disc, and the gypsum tiles with a hand saw for cutting wood. When applying the adhesive to the stone panel, spraed it evenly and push the tile to wall. 
As most of our products reflect naturally occurring minerals, and their method of production is largely based on manual moulding and the use of natural ingredients, the variance of shades of individual collections is a normal phenomenon. To maintain the desired appearance of the Stacked Stone or Brick Cladding, we recommend mixing components from different packages during installation.

Protecting Stone Cladding Surface 

When your Stone Feature wall is done and installation completed, you should  protect the surface of the stone cladding with a suitable P&A Home Mate Ltd.  impregnant (Surface Sealant) for gypsum or concrete products. Impregnant makes it easy to keep the stone clean and prevents possible appearance of efflorescence. It also enhancing colour and when used 2-3 times allowing toachieve " Wet Stone Effect ".